KEPPELER GERMANY - Technische Entwicklungen GmbH - Sportwaffen - Metallschaft - EinsteckläufeDEEN
Keppeler GmbH
Technische Entwicklungen
Hauptstr. 34/1
D-74427 Fichtenberg

Tel.: +49 (0) 7971 / 911241
Fax: +49 (0) 7971 / 911243

Mail: info@keppeler-te.de

Benchrest

Our Keppeler benchrest rifles are offered in the following versions:   

Benchrest with
Metal Stock K05-B 

Benchrest Rifle
with Laminated
wooden stock varnished

Benchrest Rifle with
Laminated Wooden Stock

Benchrest Rifle
Heavy Varmint

Benchrest Rifle with
Walnut Stock

 

All of our Keppeler benchrest rifles have only one goal: To shoot as precisely as possible. We exclusively use barrels of highest grade to achieve the best possible accuracy. For our benchrest rifles we use barrels of 650 mm length and 31 mm diameter. The steel action is a one-piece, square, bolt action. The steel action leads to high stiffness and torsional rigidity. The bolt locks with seven locking lugs right after the chamber. The travel of the firing pin was designed to the shortest possible standard to reduce the lock time. The low action offers the possibility to mount the sights close to the bore axis which can lead to a better control of the rifle. Canting mistakes result in minor misses. All of our benchrest rifles have the following features:

  • Free-floating, heavy 650 mm match barrel
  • Easy loading and taken out of cases due to perfectly designed opening window
  • The ejector can be taken out to take out the cases by hand
  • Short firing pin travel and therefore a very short lock time

  • 100 g Anschütz match trigger with safety lever
  • 150 mm long, 11 mm dove tail on the action to fit common rear sights or scopes with our Keppeler scope mounting
  • an over-width fore-end
  • 2 fixing screws

back to top

Keppeler Benchrest Rifle with Metal Stock K05-B (F-Class)
(order number: 010040)

For the followers of aluminum stocks, we offer the benchrest rifle bedded in our aluminum stock K05-B.
This rifle is distinguished by the following features:

  • Metal stock K05-S, which is especially designed for full bore shooting
  • Special, over-width fore-end
  • Curved rubber butt plate
  • Weight approx. 7.3 kg

We offer this rifle in the following calibers:

.222 Remington
.223 Remington
6 mm PPC 262
6 mm PPC USA
6 mm Norma BR
6 mm Norma XC
6,5 x 284
6,5 x 47 Lapua
6,5 x 55
7 mm - 08 Remington
7,5 x 55
.308 Winchester
.300 Winchester Magnum

Further calibers are available on request. Against surcharge are available:

  • left-hand design
  • picatinny rail
  • 30" barrel instead the 650 mm barrel
  • action and barrel in stainless

The rifle is delivered without riflescope and mounting. We recommend the use of the Keppeler Benchrest Front Rest and the Keppeler Benchrest Buttstock Support.

back to top

Keppeler Benchrest Rifle with laminated wooden stock varnished (F-Class)
(order number: 010042)

For the shooters who want their rifle to have a special look, we offer the Keppeler benchrest rifle with laminated wooden stock varnished. The color of the stock is at your option.The Keppeler benchrest rifle with laminated wooden stock varnished is distinguished by the following features:   

  • individually laminated wooden stock varnished with an over-width fore-end
  • color at your optionaction bedded in synthetic resin
  • action and barrel in stainless
  • aluminum butt plate
  • weight approx. 6.3 kg

We offer this rifle in the following calibers:

.222 Remington
.223 Remington
6 mm PPC 262
6 mm PPC USA
6 mm Norma BR
6 mm Norma XC
6,5 x 284
6,5 x 47 Lapua
6,5 x 55
7 mm - 08 Remington
7,5 x 55
.308 Winchester
.300 Winchester Magnum

Further calibers are available on request. Against surcharge are available:

  • left-hand design
  • picatinny rail
  • 30" barrel instead the 650 mm barrel

The rifle is delivered without riflescope and mounting. We recommend the use of the Keppeler Benchrest Front Rest and the Keppeler Benchrest Buttstock Support .

back to top

Keppeler Benchrest Rifle with laminated wooden stock (F-Class)
(order number: 010045
)

Our Keppeler Benchrest rifle is also available with a blue laminated stock. The blue stock provides a fine contrast to the used stainless components. This rifle is distinguished by the following features:

  • special laminated wooden stock with an over-width fore-end
  • action bedded in synthetic resin
  • action and barrel in stainless
  • picatinny rail
  • rubber butt plate
  • weight approx. 6.2 kg

We offer this rifle in the following calibers:

.222 Remington
.223 Remington
6 mm PPC 262
6 mm PPC USA
6 mm Norma BR
6 mm Norma XC
6,5 x 284
6,5 x 47 Lapua
6,5 x 55
7 mm - 08 Remington
7,5 x 55
.308 Winchester
.300 Winchester Magnum

Further calibers are available on request. Against surcharge are available:

  • left-hand design
  • 30" barrel instead the 650 mm barrel

The rifle is delivered without riflescope and mounting.

We recommend the use of  the Keppeler Benchrest Front Rest and the Keppeler Benchrest Buttstock Support.  

back to top 

Keppeler Benchrest Rifle Heavy Varmint
(order number: 010046)

This benchrest rifle is especially designed for the discipline Heavy Varmint. For this discipline the rifles must not exceed a total weight of 13 ½ lb (6.123 kg) including sights. To ensure that we stay within the weight restrictions we use in our aluminum action a 570 mm tapered barrel. The total weight of the rifle with trigger is approximately 5.4 kg, so that sufficient room for the mounting of a rifle scope is left. The action is bedded in synthetic resin and has an 11 mm dove tail to hold the sights.

The rifle in caliber 6 mm PPC 262 is mounted in a black varnished laminated wooden stock. The stock has an over-width fore-end for maximum support for benchrest shooting. As trigger we use the well-proved 100 g Anschütz match trigger with safety lever.

Further calibers are available on request. Against surcharge are available:

  • left-hand design

The rifle is delivered without riflescope and mounting.We recommend the use of  the Keppeler Benchrest Front Rest and the Keppeler Benchrest Buttstock Support.

back to top 

Keppeler Benchrest Rifle with Walnut Stock (F-Class)
(order number: 010041)

The Keppeler benchrest rifle is also available with a walnut stock. This rifle is distinguished by the following features:

  • Walnut stock with an over-width fore-end
  • action bedded in synthetic resin
  • rubber butt plate
  • weight approx. 6.2 kg

We offer this rifle in the following calibers:

.222 Remington
.223 Remington
6 mm PPC 262
6 mm PPC USA
6 mm Norma BR
6 mm Norma XC
6,5 x 284
6,5 x 47 Lapua
6,5 x 55
7 mm - 08 Remington
7,5 x 55
.308 Winchester
.300 Winchester Magnum

Further calibers are available on request. Against surcharge are available:

  • left-hand design
  • picatinny rail
  • 30" barrel instead the 650 mm barrel
  • action and barrel in stainless

The rifle is delivered without riflescope and mounting.

We recommend the use of  the Keppeler Benchrest Front Rest and the Keppeler Benchrest Buttstock Support.

back to top 

Keppeler Benchrest Front Rest and Buttstock Support

Benchrest Front Rest
(order number: 090008)



Finally a front rest convincing in every respect!

Stability:

Achieved by the weight of 14 kg and 3 trail spades

Handling:
Very easy sighting, continuously vertical adjustment from 120 mm to 180 mm due to a threaded spindle M30
Precision: Clamping plate for the sandbag for lateral support, stock stop, adjusting range 80mm, integrated level
Design:
Appealing design, functional elaborated
Material:
Steel, plastic-coated
Transport:
Handy transportation due to the integrated grip in the baseplate
Colors: The basic colors of the plastic-coated parts are grey or black. Other colors are possible against surcharge. The stiff middle part and the threaded spindle are blued. The grips are made of black plastics, the screws are blued.


Benchrest Buttstock Support
(order number: 090009)

More stability with the clamping plate!

The clamping plate inhibits tilting of the sandbag while aiming and shooting. Thus more stability and better scores can be achieved.

Material: Steel, plastic-coated
Weight: 2 kg, weight with sandbag approx. 4.2 kg

back to top 



AGB | Impressum | Sitemap